diff --git a/flash-it.sh b/flash-it.sh
index 5b00ac1..1c125a8 100755
--- a/flash-it.sh
+++ b/flash-it.sh
@@ -2,6 +2,7 @@
 
 VERSION="0.2.0"
 BRANCH=master
+CUSTOM=""
 UBOOT_JOB=u-boot
 UBOOT_DIR=u-boot-bootloader
 ROOTFS_PINEPHONE_JOB=pinephone-rootfs
@@ -38,6 +39,9 @@ case $key in
                "" \
                "Options:" \
                "" \
+               "	-c, --custom		Install from custom dir. Just put you rootfs.tar.bz2" \
+               "				and u-boot-sunxi-with-spl.bin into dir and system will "\
+               "				istalled from it" \
                "	-b, --branch BRANCH	Download images from a specific Git branch." \
                "	-h, --help		Print this help and exit." \
                "" \
@@ -50,6 +54,11 @@ case $key in
         exit 0
         shift
         ;;
+	-c|--custom)
+		CUSTOM="$2"
+		shift
+		shift
+		;;
     *) # unknown argument
         POSITIONAL+=("$1") # save it in an array for later
         shift # past argument
@@ -91,7 +100,30 @@ check_dependency "tar"
 check_dependency "unzip"
 check_dependency "lsblk"
 check_dependency "mkfs.ext4"
+check_dependency "losetup"
 
+# If use custom dir check it
+if [ "$CUSTOM" != "" ]; then
+	if ! [ -d "$CUSTOM" ]; then
+		echo -e "\e[1m\e[97m!!! Directory ${CUSTOM} not exist !!!\e[0m"
+		exit 2;
+	fi
+
+	if ! [ -f "$CUSTOM/rootfs.tar.bz2" ]; then
+		echo -e "\e[1m\e[97m!!! rootfs ${CUSTOM}/rootfs.tar.bz2 not found !!!\e[0m"
+		exit 2;
+	fi
+
+	if ! [ -f "$CUSTOM/u-boot-sunxi-with-spl.bin" ]; then
+		echo -e "\e[1m\e[97m!!! uboot image ${CUSTOM}/u-boot-sunxi-with-spl.bin not found !!!\e[0m"
+		exit 2;
+	fi
+
+	if ! [ -f "$CUSTOM/boot.scr" ]; then
+		echo -e "\e[1m\e[97m!!! uboot config ${CUSTOM}/boot.scr not found !!!\e[0m"
+		exit 2;
+	fi
+else
 # Different branch for some reason?
 if [ "${BRANCH}" != "master" ]; then
     echo -e "\e[1m\e[97m!!! Will flash image from ${BRANCH} branch !!!\e[0m"
@@ -126,22 +158,21 @@ $WGET "${ROOTFS_JOB}.zip" "${ROOTFS_DOWNLOAD}" || {
 	echo >&2 "Root filesystem image download failed. Aborting."
 	exit 2
 }
+fi
 
 # Select flash target
 echo -e "\e[1mWhich SD card do you want to flash?\e[0m"
 lsblk
+echo "raw"
 read -p "Device node (/dev/sdX): " DEVICE_NODE
 echo "Flashing image to: $DEVICE_NODE"
 echo "WARNING: All data will be erased! You have been warned!"
 echo "Some commands require root permissions, you might be asked to enter your sudo password."
 
-# use p1, p2 extentions instead of 1, 2 when using sd drives
-if [[ $(echo $DEVICE_NODE | grep mmcblk) ]]; then
-	BOOTPART="${DEVICE_NODE}p1"
-	DATAPART="${DEVICE_NODE}p2"
-else
-	BOOTPART="${DEVICE_NODE}1"
-	DATAPART="${DEVICE_NODE}2"
+#create loop file for raw.img
+if [ $DEVICE_NODE == "raw" ]; then
+	sudo dd if=/dev/zero of=sdcard.img bs=1 count=0 seek=4G
+	DEVICE_NODE="./sdcard.img"
 fi
 
 # Creating EXT4 file system
@@ -154,21 +185,47 @@ done
 sudo parted $DEVICE_NODE mklabel msdos --script
 sudo parted $DEVICE_NODE mkpart primary ext4 1MB 250MB --script
 sudo parted $DEVICE_NODE mkpart primary ext4 250MB 100% --script
+
+if [ $DEVICE_NODE == "./sdcard.img" ]; then
+	echo "Prepare loop file"
+	sudo losetup -D
+	sudo losetup -Pf sdcard.img
+	LOOP_NODE=`ls /dev/loop?p1 | cut -c10-10`
+	DEVICE_NODE="/dev/loop$LOOP_NODE"
+fi
+
+# use p1, p2 extentions instead of 1, 2 when using sd drives
+if [ [ $(echo $DEVICE_NODE | grep mmcblk) ] || [ $(echo $DEVICE_NODE | grep loop)] ]; then
+	BOOTPART="${DEVICE_NODE}p1"
+	DATAPART="${DEVICE_NODE}p2"
+else
+	BOOTPART="${DEVICE_NODE}1"
+	DATAPART="${DEVICE_NODE}2"
+fi
+
 sudo mkfs.ext4 -F -L boot $BOOTPART # 1st partition = boot
 sudo mkfs.ext4 -F -L data $DATAPART # 2nd partition = data
 
 # Flashing u-boot
 echo -e "\e[1mFlashing U-boot...\e[0m"
+if [ "$CUSTOM" != "" ]; then
+sudo dd if="${CUSTOM}/u-boot-sunxi-with-spl.bin" of="$DEVICE_NODE" bs=8k seek=1
+else
 unzip "${UBOOT_JOB}.zip"
 sudo dd if="./u-boot-bootloader/u-boot/u-boot-sunxi-with-spl.bin" of="$DEVICE_NODE" bs=8k seek=1
+fi
 sync
 
 # Flashing rootFS
 echo -e "\e[1mFlashing rootFS...\e[0m"
+mkdir "$MOUNT_DATA"
+if [ "$CUSTOM" != "" ]; then
+TEMP="${CUSTOM}/rootfs.tar.bz2"
+else
 unzip "${ROOTFS_JOB}.zip"
 TEMP=`ls $ROOTFS_DIR/*/*.tar.bz2`
 echo "$TEMP"
-mkdir "$MOUNT_DATA"
+fi
 sudo mount $DATAPART "$MOUNT_DATA" # Mount data partition
 sudo tar -xpf "$TEMP" -C "$MOUNT_DATA"
 sync
@@ -178,7 +235,11 @@ echo -e "\e[1mCopying kernel to boot partition...\e[0m"
 mkdir "$MOUNT_BOOT"
 sudo mount $BOOTPART "$MOUNT_BOOT" # Mount boot partition
 sudo cp $MOUNT_DATA/boot/* $MOUNT_BOOT
+if [ "$CUSTOM" != "" ]; then
+sudo cp "${CUSTOM}/boot.scr" "$MOUNT_BOOT/boot.scr"
+else
 sudo cp "./u-boot-bootloader/$ROOTFS_DIR/boot.scr" "$MOUNT_BOOT/boot.scr"
+fi
 sync
 
 # Clean up files
@@ -188,12 +249,17 @@ do
     echo "Unmounting $PARTITION"
     sudo umount $PARTITION
 done
+
+sudo losetup -D
+
+if [ "$CUSTOM" == "" ]; then
 rm "${UBOOT_JOB}.zip"
 rm -r "$UBOOT_DIR"
 rm "${ROOTFS_JOB}.zip"
 rm -r "$ROOTFS_DIR"
-rm -rf "$MOUNT_DATA"
-rm -rf "$MOUNT_BOOT"
+fi
+sudo rm -rf "$MOUNT_DATA"
+sudo rm -rf "$MOUNT_BOOT"
 
 # Done :)
 echo -e "\e[1mFlashing $DEVICE_NODE OK!\e[0m"